Small Parts

STL files for all parts as well as original Solidworks CAD files can be found in the GrabCAD folder linked below.

View and Download on GrabCAD

Cord Stop

Single piece 3D printable cord stop, tested to work with 2mm to 4.5mm diameter nylon and polyester circular cord. The force required to release the cord is around 1-2kg depending on the materials used, similar to commercially available cord stops. Materials with a low flexural modulus such as PETG, PA, PC, or PP are strongly recommended; PLA, ABS, and fiber filled materials will probably not work.

Snap-In Zip Tie Mount for 2020 Extrusion

3D printable zip tie mount that snaps into 2020 aluminum extrusion. Sized for standard small zip ties up to 3.5mm wide. Materials with a low flexural modulus such as PETG, PA, PC, or PP are strongly recommended; PLA, ABS, and fiber filled materials will probably not work.

Anderson Powerpole Connector Retention Clip

3D printable retention clip for Anderson Powerpole 15/30/45A connectors. Print in any material.

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.